Differences

This shows you the differences between two versions of the page.

--- labs [2013/09/26 20:32] – magiero
+++ labs [2013/11/07 17:34] (current) – magiero
@@ Line 1: / Line 1: @@
 ====== Labs ======
+==== Lab 9: A Finite State Machine ====
+__Lab Date: Mon. Nov. 25, 2013, in LAS 1004A (our last lab)__
+Implement a traffic light control system.  Lots of detail to account for here so read carefully and start thinking ahead.
+{{lab9.pdf | Lab 9}}
+==== Lab 8: Counters & Registers ====
+__Lab Date: Mon. Nov. 18, 2013, in LAS 1004A__
+Implement a variety of counters as well as a linear feedback shift register (LFSR).
+{{lab8.pdf | Lab 8}}
+==== Lab 7: Latches and Flip-Flops ====
+__Lab Date: Mon. Nov. 11, 2013, in LAS 1004A__
+Implement latches and flip-flops in an FPGA.  Use them as storage elements in the assignment of numbers to a 7-segment display.
+{{lab7.pdf | Lab 7}}
+==== Lab 6: Timing Measurements ====
+__Lab Date: Mon. Nov. 4, 2013 in LAS 1004A__
+Create test vectors for your multiplier (from Lab 5) and verify its operation more thoroughly using Altera's system-level debugging tool, SignalTap.  Links on Altera timing and SignalTap below (recommended to go over these before Lab 6).
+{{lab6.pdf | Lab 6}}
+{{timingsimulation.pdf | Timing Simulations}}
+{{signaltap.pdf | Signal Tap}}
+==== Lab 5: Multipliers ====
+__Lab Date: Mon. Oct. 28, 2013 in LAS 1004A__
+Implement multipliers using a couple different adder arrangements.
+{{lab5.pdf | Lab 5}}
+==== Lab 4: Number Systems ====
+__Lab Date: Mon. Oct. 21, 2013 in LAS 1004A__
+Displaying BCD numbers and adding them up.
+{{lab4.pdf | Lab 4}}
 ==== Lab 3: Seven Segment Displays ====