Differences

This shows you the differences between two versions of the page.

--- projects [2013/09/09 17:57] – pd
+++ projects [2013/09/10 01:09] (current) – pd
@@ Line 166: / Line 166: @@
 **Description:** Real-time bidding (RTB) is a new method of selling and buying online display advertising in real-time one ad impression at a time. Once a bid request has been sent out, all bids must be received within a strict deadline - generally under 100 milliseconds, including network latency. This project explores RTBkit, an open source SDK allowing developers to create customized real time ad bidding systems (for Media Buyers/Bidders).
+\\
+------------------
+\\
+======Circuit and Board Design for a Pulsed Ground Penetrating Radar======
+**Supervisor:**Sebastian Magierowski
+**Description:** The project requires the construction of components for a ground penetrating radar.  The students would have to design microwave boards for the high-frequency components of this unit, on both the transmitter and the receiver.  On the transmitter side the board would take a 5-MHz input clock, run it through a series of off-the-shelf amplifiers and then through a shaping circuit that would convert the input into an outgoing series of pulses (still at 5-MHz repetition rate) less than 400-ps in duration each.  The bandwidth of the signal is roughly 2-8 GHz and hence requires very careful board layout.  The receiver would be a time-shifted sampler, used to sample the returning pulses in progressive periods.  This radar circuit is ultimately intended to be positioned on a rover doing ground analysis.
+**Required Background** A background in undergraduate-level electronics is very important.  Experience with board level implementations and knowledge of microstrip lines would be helpful, otherwise the basics would have to be picked up during the project.
 \\