Intel's Manycore Testing Lab


By using MTL you agree that you have read and understood the Manycore Testing Lab Remote Access Agreement.

How to change your password

Use the command passwd to change your password.

How to connect to MTL

MTL has registered one of York's IP addresses to their system, so we can connect through “Direct IP.” The IP address registered is, so to connect to MTL, we need to connect to indigo first. If you're using the computer on campus, open terminal and type ssh indigo (doesn't need username and password). If you connect from home, use an ssh client to connect to, then login with your EECS account and password.

From indigo, we can connect to MTL using this command:

ssh -l username

The username and password will be provided by email. Once connected, your home directory will be:


How to transfer file(s) from/to MTL

We can transfer files between our home directory at indigo and our home directory on MTL using scp command.

Copying from MTL to indigo:

scp username@<file_path_on_MTL> <file_path_on_indigo>

Copying from indigo to MTL:

scp <file_path_on_indigo> username@<file_path_on_MTL>

If we want to transfer a file to our current active directory, we can just type a single dot (.)

Here are several some examples

Copy 1 file from MTL to indigo

scp username@ .

Copy the whole folder + subfolder from MTL to indigo

scp -r username@ .

Copy several files from MTL to indigo

scp username@\{,\} .

Copy all files in current active directory (local) to MTL

scp * username@

WinSCP is a very nice freeware SCP/FTP/SFTP package for Windows. (It also has it's own embedded SSH terminal, but it's not terribly useful.) With WinSCP, you can connect to MTL from your home computer and drag and drop to upload/download files.

To connect to MTL with WinSCP, set up a session with MTL's IP as the host, and your MTL username/password. Then, before you save/connect to the session and close the window, set it up to tunnel through indigo to MTL by clicking the “Tunnel” item in the tree-pane on the left, and checking “Connect through SSH tunnel,” entering “” as host, and your EECS username/password. After this, you can interact with the file structure on MTL as if it were a part of your local file-system.

How to run an experiment

More information can be found in this guide and this guide.

Maximum number of CPUs and threads

The MTL machine has 32 cores with hyperthreading, but the hyperthreading option is turned off, so practically there are only 32 physical threads. The system itself has a limit of 150 threads, so make sure your program's thread count doesn't exceed that number. Don't forget that the experiment machine also needs some threads to run the OS, etc, so it's best to keep your program to use at most 140 threads.


The forum Intel® Manycore Testing Lab provides answers to many questions.