(Projects that were proposed in Summer 2013)
Supervisor: Amir Asif
Required Background: Computer Vision or Signal and Systems Course preferred; Matlab; Interest in Signal/Image Processing
Short Description: Over the past decade, large-scale camera networks have become increasingly popular in a wide range of applications, including: (i) Sports analysis; (ii) Security and surveillance; (iii) disaster response, and; (iv) Environmental modeling, where the objective is to follow the trajectory of a key target, for example, a star player in a soccer game or a suspect in a surveillance environment. In many applications, bandwidth constraints, security concerns, and difficulty in storing and analyzing large amounts of image data centrally at a single location necessitate the development of distributed camera network architectures. In this project, we investigate distributed scene analysis algorithms, where each camera estimates certain parameters of the target using a signal processing algorithm based upon its own set of observations. The local estimates are then shared with the neighboring cameras in an iterative, goosip-type fashion, and a final estimate is computed across the network using consensus algorithms. The selected student will develop Matlab code to apply distributed signal processing algorithms [1,2] that have been developed in the Signal Processing and Communications lab for target tracking and activity recognition in distributed camera networks.
[1] A. Mohammadi and A. Asif, Distributed Particle Filter Implementation with Intermittent/Irregular Consensus Convergence, IEEE Transactions on Signal Processing, 2013. http://arxiv.org/abs/1112.2431.
[2] A. Mohammadi and A. Asif, Decentralized Sensor Selection based on the Distributed Posterior Cramer-Rao Lower Bound, in proceedings of IEEE International Conference on Information Fusion, Singapore, 2012. pp. 1668-1675.
Supervisor: Wolfgang Stuerzlinger
Required Background: 3D computer graphics, C/C++ coding
The Leap Motion, leapmotion.com, is a new device that lets users control a computer with their fingers. This project creates a new 3D drawing system that enables users to quickly generate 3D solids.
Supervisor: Wolfgang Stuerzlinger
Required Background: 3D computer graphics, C/C++ coding
The 3Gear system, threegear.com, lets users control a computer with their hands and fingers. This project creates a new 3D drawing system that enables users to quickly generate and modify 3D solids.
Supervisor: Scott MacKenzie
Required Background: General 4080 prerequisites, CSE3461, and (preferably) CSE4441. Interest in user interfaces and human-computer interaction (HCI). Students can use their own Android phone for the project or one supplied by the course supervisor.
Touchscreen mobile devices commonly use a built-in accelerometer to sense movement or tilting actions of the device. Tilt is commonly used the change the orientation of the display between portrait and landscape. Gaming is another common use for tilting actions. However, tilt may also be used for target selection, as a replacement for touch. This research project will evaluate tilt as an input primitive for target selection on touchscreen mobile devices.
Readings: MacKenzie, I. S., & Teather, R. J. (2012). FittsTilt: The application of Fitts’ law to tilt-based interaction. Proceedings of the Seventh Nordic Conference on Human-Computer Interaction – NordiCHI 2012, pp. 568-577. New York: ACM.
Supervisor: James Elder
Required Background: General CSE408x prerequisites, good programming skills, good math skills, knowledge of C and MATLAB programming languages
One of the challenges in remote learning is to allow students to communicate effectively with the lecturer. For example, when a student asks a question, communication will be more effective if the instructor has a zoomed view of the student’s face, so that s/he can interpret expressions etc.
The goal of this project is to apply attentive sensing technology (www.elderlab.yorku.ca) to this problem. This technology is able to monitor a large environment such as a classroom and direct a high-resolution ‘attentive’ sensor to events of interest.
In particular, working with a senior graduate student or postdoctoral fellow, the successful applicant will:
Supervisor: James Elder
Required Background: Good programming skills; Good math skills; Knowledge of C and MATLAB programming languages
The goal of this project is to modify York University’s patented attentive sensor technology to the sport video recording market. Specific application domains under investigation include skiing, indoor BMX parks, and horse tracks.
The general problem is to use attentive sensing technology (www.elderlab.yorku.ca) to visually detect and track multiple moving agents (e.g., skiers, riders, horses) and to select specific agents for active high-resolution smooth pursuit.
The student will work with senior graduate students, postdoctoral fellows and research scientists to help modify the attentive sensing technology to operate in these domains. Specific tasks include:
1. Ground-truth available datasets 2. Evaluate current attentive algorithms on these datasets 3. Modify these algorithms to improve performance on these datasets
Supervisor: Jeff Edmonds
Required Background: General CSE408x prerequisites
Recommended Background: Java software development
Structural equation modeling (SEM) is a statistical technique that is becoming increasingly popular in the educational and behavioral sciences. SEM allows researchers to test the validity of hypothesized models involving complex relationships among multiple variables. Collected data is used to estimate the parameters of the equations and assessing the fit of the model.
The software required is an application that allows researchers to define their hypothesized models visually and will output the correct syntax for the analytical software of their choosing.
To date a promising functional application has been developed in JAVA by a Computer Science student as a 4080 project. The existing software allows the user to draw a path diagram and outputs code for the R package sem. There are a number of improvements to be made (refinements and additions to graphical user interface) and then the application needs to be extended to output syntax appropriate for additional software applications (openMX, MPlus and EQS). Though this project may not begin at “the first stages” of the software lifecycle, this scenario is likely common in the software development market. In addition, the student will be working with a primary “client” who is far less technically advanced, which is also reflective of real-world situations.
More details here.
Supervisor: Sotirios Liaskos (liaskos at yorku dot ca)
Required Background: Good knowledge of Unix tools / Python, Perl or Awk. Comfort with algorithms and programming. Essential: 2031 – Software Tools. Desired: 3402 – Functional & Logic Programming, 3101 – Design and Analysis of Algorithms, 4302 – Compilers and Interpreters.
Description: This project involves enriching and integrating a set of fairly complex scripts, which are components of an Artificial Intelligence (AI) planner, and exporting them to the public in a Software-as-a-Service (SaaS) fashion.
The components are various Unix executables and LISP programs that need to interact in complex ways. The components may be residing in different servers in different universities. Currently integration is performed manually, at the expense of usability. Thus, we aim at constructing a module that: (a) integrates involved components to deliver output in one call, (b) exports a unique web interface (preferably following WSDL/SOAP) to be easily accessed by custom front-end tools by anyone, anywhere, (c ) offers a simple front-end for human users.
Learning objectives:
Supervisor: Burton Ma
Description: Registration is a fundamental step in image-based surgical navigation. Several (seemingly) different approaches for predicting distance errors in registration are known, but for some surgical procedures, the angular error in registration is more important. This project will validate an approach for predicting angular error in registration; the student will use a combination of simulated and actual registration data for testing purposes.
Supervisor: Burton Ma
Description: Tracked pointers are the most common tools used in surgical navigation systems. A typical pointer has a tracked target on one end and a sharp or ball tip on the other end. Finding the location of the tip relative to the target is a calibration problem. One solution to the calibration problem involves pivoting the pointer about the tip while tracking the target; if the tip is kept stationary, then the target moves on the surface of a sphere. Fitting the tracking data to the surface of a sphere yields the location of the tip as the sphere center. Unfortunately, the calibrated tip position obtained using such a spherical calibration has high variance. This project will investigate how much variance there is in the calibrated tip position, and methods for reducing the variance of the calibrated tip position.
Supervisor: Uyen Trang Nguyen
Description: One of the major privacy concerns in Online Social Networks is photo sharing. A user may post his/her friends’ photos without their consent. The friends have no control over the user’s Facebook activities, namely photo sharing. In this project, we design and implement a third-party Facebook application that allows people to protect their identities in photos uploaded by another user without their consent.
Required prerequisite background: Proficiency in programming, especially in Java and Web application programming.
Desired prerequisite: Knowledge of image processing, Facebook API, JavaScript Object Notation (JSON)
(These projects were proposed in Summer 2011. Listed in alphabetical order of the supervisor's last name.)
Supervisor: Rob Allison
Required Background: General CSE408x prerequisites
Recommended Background: CSE3431 or CSE4471 or equivalent
Description
Detection of forest fires is a challenging activity that requires considerable training. The objective of this project is to implement a virtual reality simulation to incorporate key aspects of this task and then to perform an evaluation with a small user study.
Supervisor: Rob Allison
Required Background: General CSE408x prerequisites
Recommended Background: CSE3431 or CSE4471 or equivalent
Description
This is a computer graphics project to present visual motion stimuli to an observer. The software will experimentally control scene content, collect user responses and control the camera trajectory to simulate the desired self-motion profile.
Supervisor: Rob Allison
Required Background: General CSE408x prerequisites
Recommended Background: CSE3431 or CSE4471 or equivalent
Description
Directors of three-dimensional movies sometimes use 'stereo calculators' to compute the simulated depth of objects in the film show to the viewer in order to maximize the stereoscopic effects and maintain comfortable viewing. However current calculators have limited ability to visualize the results of the calculations. This project will combine stereo calculations with visualization software to assist the director in artistic and technical decisions.
Supervisor: Scott MacKenzie
Required Background: General 4080 prerequisites, CSE3461, and (preferably) CSE4441
Recommended Background: Interest in user interfaces and human-computer interaction (HCI). Understanding of experiment design. Experience in doing user studies.
Supervisor: Scott MacKenzie
Required Background: General 4080 prerequisites, CSE3461, and (preferably) CSE4441
Recommended Background: Interest in user interfaces and human-computer interaction (HCI). Understanding of experiment design. Experience in doing user studies.
Supervisor: Andy Mirzaian
Required background: General prerequisites
Recommended background: CSE 3101
Description
The URL for Algorithmics Animation Workshop (AAW) is http://www.cs.yorku.ca/~aaw. The main purpose of AAW is to be a pedagogical tool by providing animation of important algorithms and data structures in computer science, especially those studied in courses CSE 3101, 4101, 5101, 6114, 6111. This is an open ended project in the sense that more animations can be added to this site over time.
Supervisor: Jonathan Ostroff
Required background: General prerequisites, at least a B+ in CSE 3311
Recommended background: Knowledge of Javascript a plus
Description
The Selenium IDE is an integrated development environment for Selenium scripts. It is implemented as a Firefox extension, and allows you to record, edit, and debug tests of web applications. The Selenium IDE is a recording tool, or you may edit your scripts by hand. With autocomplete support and the ability to move commands around quickly, Selenium IDE is the nice environment for creating webtests no matter what style of tests you prefer.
Tests can be translated to Java (JUnit), C#, Python etc. It can be extended to any language that can make HTTP calls.
The goal of this project is (1) to translate Selenium tests into tests that can be run under Eiffel (e.g. via ESpec or AutoTest), and (2) to provide a complete Eiffel web application creation template (with embedded database such as sqlite) for creating and testing web applications.
Supervisor: Zbigniew Stachniak
Required background: General prerequisites
Recommended background: Passion for programming and experimentation; Some knowledge of propositional and predicate logic
Description
Quantified Propositional Logics (QPL) plays an important role in a number of computer science disciplines from the theoretical computer science to knowledge representation and verification. There are also a number of open problems concerning this logic, and formulated more than 70 years ago, that can be finally solved (or at least approached) using automated reasoning techniques. The first step in such investigations has to be the design and implementation of a theorem prover, or automated reasoning system, for QPL. Such a system should, in principle, be able to determine whether or not a given formula of QPL is a theorem (or a tautology) in this logic.
The theorem prover for QPL is to be designed, implemented, and fully tested.
Background: Various variants of QPL have been formally formulated for the first time in the 1920s by a number of logicians and mathematicians. In modern computer science, QPL plays a significant role in theoretical computer science (proof complexity, satisfiability) as well as in verification and AI.
Supervisor: Zbigniew Stachniak
Required background: General prerequisites
Recommended background: Java (including 2D graphics); Some knowledge of PC hardware architecture; Some knowledge of (any) assembler language is an asset.
Description
Have you ever considered writing your own emulator of an interesting system? There has been a substantial activity in building software emulators of historically significant computers, game consoles, and, recently, smart communication devices. As a result, there is at least one emulator of almost every significant system. This activity contributes, in the first place, to the preservation and dissemination of significant hardware and software technologies. It also allows for cost-effective development of contemporary software and hardware. The project's objective is to design and implement an emulator of the NABU Network – one of the earliest “proto-Internet” networks. The emulator is to be implemented in Java.
Background : The NABU Network was designed and implemented by a Canadian company NABU Manufacturing between 1981 and 1983. The underlying idea behind the network was to link home personal computers to cable television networks which would supply a continuous, high speed stream of computer programs and information (at the rate of 6.5 Mbits per second) to almost an unlimited number of users. Cable television was a uniquely ideal technology for NABU to deliver software and data to home computers because of its high bandwidth and networking capabilities. After the official launch on Ottawa Cablevision in October of 1983, the NABU Network was introduced by Ottawa's Skyline Cablevision in 1984 and a year later in Sowa, Japan, via a collaboration between NABU and ASCII Corp. NABU Network subscribers could rent or buy a NABU PC and dedicated network adaptor, and use an ordinary television set as a display monitor. Once connected to the network, a user could choose from various application programs and services in categories including entertainment, information and guides, education, and professional programs. Dedicated NABU magazines, newsletters, programming guides, and user groups provided subscribers with supplementary information and support. To learn more, visit here .
Supervisor: Wolfgang Stuerzlinger
Required Background: General CSE4080 prerequisites
Recommended Background: CSE3431 or equivalent
Description
Tangible user interfaces provide the user with object that they can touch and use as input devices. One example is the use of (tracked) toy houses to perform a city planning task on a large surface. This project implements a new form of tracking/identification scheme for tangible objects via LED arrays mounted on them. Furthermore, and using robotic components, the tangible objects will have the ability to move around autonomously, which enables important functionalities such as undo and replay.
Supervisor: Wolfgang Stuerzlinger
Required Background: General CSE4080 prerequisites
Description
The layout mechanisms for many GUI toolkits are hard to understand and often difficult to use. This project investigates new, easy-to-understand layout mechanisms and evaluates an implementation of one of them in a comparative user study. Platform: any modern GUI toolkit.
Supervisor: Wolfgang Stuerzlinger
Required Background: General CSE4080 prerequisites
Description
Previous work of the supervisor generated a novel and highly accurate Virtual Reality tracking system based on (eye-safe) laser diodes. The speed and accuracy of this system matches or exceeds the specification of all competing commercial systems. However, this system works only in 5 or 6-sided immersive display environment. Recent work has adapted the system to track successfully with as little as one large display wall and has also characterized the accuracy more comprehensively. The next step is to generalize the system to work in normal rooms, which may have lamps, shelves, etc. Here, visibility obstructions play a significant role and predicting these obstructions can be used to increase the tracking accuracy. This project will simulate a new method for visibility obstruction prediction to detect how big an increase in accuracy can be expected.
Supervisor: Wolfgang Stuerzlinger
Required Background: General CSE4080 prerequisites
Description
K-3D is a successful, open-source, 3D modeling system, that can even deal with million-polygon models in real-time. This project aims to improve the user interface for K-3D by adding several novel 3D manipulation techniques. While all the mentioned operations already exist in in K-3D, the user interfaces are typically fairly inefficient and/or require significant learning. Depending on the outcome, the results of each project may even be merged back into the K-3D distribution. Each of the following two items can be considered a separate project:
Integration of an existing implementation of a 3D sliding technique, which greatly facilitates 3D object movement. The ability to draw new “lines”, rectangles, and other 2D constructs in a simple manner onto surfaces. This ability greatly simplifies many interesting operations, such as the creation of extrusions, holes, etc.