====== LABS ======
===== Lab 1 =====

{{:lab_1.pdf|Lab 1}}

The lab report is due the end of the second lab session at the same time as the demo to the TA

\\
A {{:quartus_std_introduction.pdf|Verilof tutorial}} for DE2

**submit as; submit 3215 LAB01 R1.pdf** or docx

-----
-----
-----

=====Lab 2 =====

{{:lab_2.pdf|lab 2}}

Friday 18 and Monday 21st in the lab

The demo is by the end of the lab session, the report is due Monday 28\\

-----
-----
-----

====== Where to buy the board ======

Digikey https://www.digikey.ca/products/en/development-boards-kits-programmers/evaluation-boards-embedded-mcu-dsp/786?k=kl43z&k=&pkeyword=kl43z&sv=0&pv1742=44&sf=0&FV=ffe00312&quantity=&ColumnSort=0&page=1&pageSize=25

Mouser https://www.mouser.ca/ProductDetail/NXP-Freescale/FRDM-KL43Z?qs=sGAEpiMZZMtzpSA5GSDwa4h%2fTfDsQpc4eHEHoEETWww%3d

=====Lab 3 =====


lab sessions Friday Jan 25 and Monday Jan 28

Beofre you start take a look at htose videos

Prof. James Smith explaining FRDM kl43z and a first project video  [[https://www.youtube.com/watch?v=u5DWSw9bkrs]]  and  [[https://www.youtube.com/watch?v=dEmPi6U1kTQ]]\\

**FRDM kl43Z** {{:frdmkl43zug.pdf|User Guide}} and {{:frdm-kl43z_qsg-1302866.pdf|datasheet}}\\

**Board Schematic** {{:frdm-kl43z_sch.pdf|}}

here is [[https://www.nxp.com/video/mcuxpresso-ide-creating-new-sdk-project:MCUXPRESSO-IDE-CREATING-SDK]] A video from NXP\\

\\
{{:lab_3.pdf|Lab 3}} note there is no lab report for this lab\\


-----
-----
-----

=====Lab 4 =====
This lab takes 2 weeks, in the first week you will learn how to solder the connector to the board. if you bought a board, please bring it with you.\\ \\

{{:lab_4.pdf|Lab 4}} 
-----
-----
-----

=====PROJECT=====

  * The project is done in groups of 2, by default, a bigger group has to have a permission.
 
  * The project should involve a microcontroller and some peripherals. Sensors or displays are some examples.

  * Preferably, you should use the KL43Z, but that is not a condition. You can use any board, the easier/simpler the board is, the more involved the project should be

  * You should have a proposal ready after the reading week. The one page should state what you will do and the parts you need to do it.

  * Before you buy anything, check the compatibility with the board you are using

**What to include in the report**  {{:project.pdf|here}}


-----
-----
-----

=====Lab 5 =====

{{:lab_5.pdf|Lab 5}}

New information were added to lab 5, the API is here [[https://mcuxpresso.nxp.com/api_doc/dev/210/group__dac.html]]

for register definitions [[http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0179b/ar01s02s08.html]]

-----
-----
-----


=====Lab 6 =====

{{:lab_6.pdf|Lab 6}}

The report is due midnight Tuesday March 12

-----
-----
-----


=====Lab 7 =====

{{:lab_7.pdf|LAB 7}}

The report is due midnight Tuesday March 19

-----
-----
-----


=====Lab 8 =====

{{:lab_8.pdf|LAB 8}} already updated

-----
-----
-----