Differences

This shows you the differences between two versions of the page.

--- labs [2019/01/29 21:24] – aboelaze
+++ labs [2019/03/22 22:53] (current) – aboelaze
@@ Line 57: / Line 57: @@
 =====Lab 4 =====
+This lab takes 2 weeks, in the first week you will learn how to solder the connector to the board. if you bought a board, please bring it with you.\\ \\
+{{:lab_4.pdf|Lab 4}}
 -----
 -----
 -----
+=====PROJECT=====
+  * The project is done in groups of 2, by default, a bigger group has to have a permission.
+  * The project should involve a microcontroller and some peripherals. Sensors or displays are some examples.
+  * Preferably, you should use the KL43Z, but that is not a condition. You can use any board, the easier/simpler the board is, the more involved the project should be
+  * You should have a proposal ready after the reading week. The one page should state what you will do and the parts you need to do it.
+  * Before you buy anything, check the compatibility with the board you are using
+**What to include in the report**  {{:project.pdf|here}}
+-----
+-----
+-----
 =====Lab 5 =====
+{{:lab_5.pdf|Lab 5}}
+New information were added to lab 5, the API is here [[https://mcuxpresso.nxp.com/api_doc/dev/210/group__dac.html]]
+for register definitions [[http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0179b/ar01s02s08.html]]
 -----
@@ Line 71: / Line 97: @@
 =====Lab 6 =====
+{{:lab_6.pdf|Lab 6}}
+The report is due midnight Tuesday March 12
 -----
@@ Line 78: / Line 108: @@
 =====Lab 7 =====
+{{:lab_7.pdf|LAB 7}}
+The report is due midnight Tuesday March 19
 -----
@@ Line 85: / Line 119: @@
 =====Lab 8 =====
+{{:lab_8.pdf|LAB 8}} already updated
 -----