Differences

This shows you the differences between two versions of the page.

--- tutorials:cad:start [2013/12/12 04:46] – magiero
+++ tutorials:cad:start [2015/02/16 16:56] (current) – magiero
@@ Line 1: / Line 1: @@
 ====== CAD ======
-===== CSE Account Setup =====
-Email Jason Keltz (jas@cse.yorku.ca) about getting an account set-up on which you can run the CMC-brokered CAD tools.
-===== CAD Activate =====
-Once you have your CSE account make sure to validate it with CMC such that you can use the tools that you or your supervisor has paid for.
-From the command line type:
-<code>
-/CMC/scripts/CADactivate/cadactivate.sh
-</code>
-And follow the directions appearing in the ensuing pop-up window.
 ===== Cadence =====
-We have partitioned our Cadence tools among the IC technology we wish to explore with it and the Cadence version number we wish to run.  To avoid problems create a directory from which you will run one (and only one!) Cadence start-up command (listed below).  For example if you want to explore TSMC's 90-nm CMOS technology using version 5.10.41 create a directory like ''TSMC90nm'' go into it and start-up the Cadence tools with ''cad-tsmc905''.  Whenever you want to start up that tool for that technology go back to that directory and start-up Cadence.  If you want any other tool and/or any other technology create a new directory and apply the appropriate start-up command.
+We have partitioned our Cadence tools among the IC technology we wish to explore with it and the Cadence version number we wish to run.  To avoid problems create a directory from which you will run one (and only one!) Cadence start-up command (listed below).  For example if you want to explore TSMC's 90-nm CMOS technology using version 5.10.41 create a directory like ''TSMC90nm'' go into it and start-up the Cadence tools with ''cad-tsmc905''.  Whenever you want to start up that tool for that technology go back to that directory and start-up Cadence.  If you want any other tool and/or any other technology create a new directory and apply the appropriate [[caddocs:scripts | start-up command]].
-==== Start-Up Commands ====
+{{:tutorials:cad:t1analogbasics.pdf | Tutorial 1: Basic Analog Simulation in Cadence}}
-  - cad-1805:
-  - cad-1806:
-  - cad-ibm5: IBM's 130-nm CMOS technology running on Cadence Virtuoso v5.10.41.
-  - cad-ibm6:
-  - cad-tsmc905:
-  - cad-tsmc906:
-  - cad-tsmc655:
-  - cad-tsmc656:
-{{t1analogbasics.pdf | Tutorial 1: Basic Analog Simulation in Cadence}}
 ===== Synopsys =====
-==== Start-Up Commands ====
-  - syn-vcs: Use the VCS simulator to verify and debug your RTL code.
-  - syn-dc: Use Design Compiler to synthesize your design into gates.
-  - syn-fm: Use Formality to verify your synthesized design.
-  - syn-icc: Use IC Compiler to place and route your design.
-  - syn-pt: Use PrimeTime to produce power consumption estimates.