Differences

This shows you the differences between two versions of the page.

--- prism_labs [2021/03/17 19:31] – jaspal
+++ prism_labs [2021/03/26 16:38] (current) – jaspal
@@ Line 20: / Line 20: @@
 === Technical Resources ===
-== EECS3201 Digital Design and EECS3216 Digital System Course ==
+== EECS3201 / EECS 3216 Digital Design and Digital System Courses ==
+**Note:** The following two tutorials are oriented towards **WindowsOS**. For **MacOS** see the next section.
 __Installing Software and Drivers__\\
-This tutorial describes how to install Intel (Altera) Quartus Software, ModelSim, fpga Devices, related Drivers and to Verify your setup
+This tutorial describes how to install Intel (Altera) Quartus Software, ModelSim, fpga
+Devices, related Drivers and to Verify your setup
-The tutorial is specifically for **//Quartus version 20.1 and for Max 10 family//** of FPGA devices. You would have to alter the steps, if using a different version and device family.
+The tutorial is specifically for **//Quartus version 20.1 and for Max 10 family//** of FPGA
+devices. You would have to alter the steps, if using a different version and device family.
 To download the tutorial, click {{:tutorial_quatusinstallandverify.pdf|here.}}
@@ Line 31: / Line 35: @@
 __ModelSim Simulator__\\
-This tutorial explains running ModelSim simulator, from within the Quartus project, to simulate and verify your Digital Design.
+This tutorial explains running **//ModelSim simulator//**, from within the Quartus project, to
+simulate and verify your Digital Design.
+Download the tutorial {{:tutorial_modelsimfromquartus.pdf|from here.}}\\
+Click on this {{:modelsimtutorialfiles.zip|link}} for the verilog files used in this tutorial.
-Download the tutorial {{:tutorial_modelsimfromquartus.pdf|from here.}}
+**__//Steps for MacOS//__**
-Click on this {{:modelsimtutorialfiles.zip|link}} for the verilog files used in this tutorial.
+Running Quartus and ModelSim on MacOS is __Not__ natively supported. However there are few work-arounds, which have been tried and tested. \\ \\
+Follow the steps in this {{:tutorial_macos.docx|document}} to correctly install and setup Quartus and Modelsim when using a MacOS computer.
+__Interactive Tutorials__\\
+  * Check out this [[https://www.aldec.com/en/downloads|external link]] from Aldec, for Interactive Tutorials on VHDL and Verilog. **Note:** You will be required to 'Register' prior to downloading.\\
+  * A good series of short videos, by Cadence Design, on SystemVerilog can be found on [[https://www.youtube.com/watch?v=U18k9TDP5uw|YouTube]]