User Tools

Site Tools


prism_labs

PRISM LABS

Lab Safety

For all the Engineering labs, a Health and Safety presentation is made, during the first lab of the term. Here the students are made aware of:
- University's safety policies and procedures
- Available Health, Safety and Well-being resources, available to students on campus
- Expectations from them, regarding safe working in the labs

University Health and Safety Resources

- For more information on University's Health, Safety and Well-being, visit this page.

- For information on University's Phased Return to Campus, during COVID-19, YU Better Together please check out this link.

Technical Resources

EECS3201 / EECS 3216 Digital Design and Digital System Courses

Note: The following two tutorials are oriented towards WindowsOS. For MacOS see the next section.

Installing Software and Drivers
This tutorial describes how to install Intel (Altera) Quartus Software, ModelSim, fpga Devices, related Drivers and to Verify your setup

The tutorial is specifically for Quartus version 20.1 and for Max 10 family of FPGA devices. You would have to alter the steps, if using a different version and device family.

To download the tutorial, click here.

ModelSim Simulator
This tutorial explains running ModelSim simulator, from within the Quartus project, to simulate and verify your Digital Design.

Download the tutorial from here.
Click on this link for the verilog files used in this tutorial.

Steps for MacOS Running Quartus and ModelSim on MacOS is Not natively supported. However there are few work-arounds, which have been tried and tested.

Follow the steps in this document to correctly install and setup Quartus and Modelsim when using a MacOS computer.

Interactive Tutorials

  • Check out this external link from Aldec, for Interactive Tutorials on VHDL and Verilog. Note: You will be required to 'Register' prior to downloading.
  • A good series of short videos, by Cadence Design, on SystemVerilog can be found on YouTube
prism_labs.txt · Last modified: 2021/03/26 16:38 by jaspal