Differences

This shows you the differences between two versions of the page.

--- prism_labs [2021/03/25 16:54] – jaspal
+++ prism_labs [2021/03/26 16:38] (current) – jaspal
@@ Line 20: / Line 20: @@
 === Technical Resources ===
-== EECS3201 Digital Design and EECS3216 Digital System Course ==
+== EECS3201 / EECS 3216 Digital Design and Digital System Courses ==
 **Note:** The following two tutorials are oriented towards **WindowsOS**. For **MacOS** see the next section.
@@ Line 41: / Line 41: @@
 Click on this {{:modelsimtutorialfiles.zip|link}} for the verilog files used in this tutorial.
-**__Steps for MacOS__**
+**__//Steps for MacOS//__**
 Running Quartus and ModelSim on MacOS is __Not__ natively supported. However there are few work-arounds, which have been tried and tested. \\ \\
 Follow the steps in this {{:tutorial_macos.docx|document}} to correctly install and setup Quartus and Modelsim when using a MacOS computer.
 __Interactive Tutorials__\\
-Check out this [[https://www.aldec.com/en/downloads|external link]] from Aldec, for Interactive Tutorials on VHDL, Verilog and SystemVerilog.\\
+  * Check out this [[https://www.aldec.com/en/downloads|external link]] from Aldec, for Interactive Tutorials on VHDL and Verilog. **Note:** You will be required to 'Register' prior to downloading.\\
-**Note:** You will be required to Register prior to downloading.
+  * A good series of short videos, by Cadence Design, on SystemVerilog can be found on [[https://www.youtube.com/watch?v=U18k9TDP5uw|YouTube]]