This is an old revision of the document!
Table of Contents
LABS
Lab 1
The lab report is due the end of the second lab session at the same time as the demo to the TA
A Verilof tutorial for DE2
submit as; submit 3215 LAB01 R1.pdf or docx
Lab 2
Friday 18 and Monday 21st in the lab
The demo is by the end of the lab session, the report is due Monday 28
Where to buy the board
Lab 3
lab sessions Friday Jan 25 and Monday Jan 28
Beofre you start take a look at htose videos
Prof. James Smith explaining FRDM kl43z and a first project video https://www.youtube.com/watch?v=u5DWSw9bkrs and https://www.youtube.com/watch?v=dEmPi6U1kTQ
FRDM kl43Z User Guide and datasheet
Board Schematic frdm-kl43z_sch.pdf
here is https://www.nxp.com/video/mcuxpresso-ide-creating-new-sdk-project:MCUXPRESSO-IDE-CREATING-SDK A video from NXP
Lab 3 note there is no lab report for this lab
Lab 4
This lab takes 2 weeks, in the first week you will learn how to solder the connector to the board. if you bought a board, please bring it with you.
Lab 4 —–
PROJECT
- The project is done in groups of 2, by default, a bigger group has to have a permission.
- The project should involve a microcontroller and some peripherals. Sensors or displays are some examples.
- Preferably, you should use the KL43Z, but that is not a condition. You can use any board, the easier/simpler the board is, the more involved the project should be
- You should have a proposal ready after the reading week. The one page should state what you will do and the parts you need to do it.
- Before you buy anything, check the compatibility with the board you are using
Lab 5
New information were added to lab 5, the API is here https://mcuxpresso.nxp.com/api_doc/dev/210/group__dac.html
for register definitions http://infocenter.arm.com/help/index.jsp?topic=/com.arm.doc.dai0179b/ar01s02s08.html
Lab 6
Lab 7
Lab 8
will be updated with register description shortly